*Rotary Tool Plunge Assembly for Dremel
YOU JUST ADD THE ROTARY TOOL!
The Rotary Tool Plunge Assembly comes fully assembled and pre-adjusted. Springs, adaptor (if required), standard acrylic base, and two hex wrenches included. Scroll down to see related products and accessories.
Here’s what world-renowned Inlay Artist Larry Robinson had to say about this tool: "I've tried a lot of different bases over the 40 years I've been inlaying and none have been as satisfying to use or as comprehensive in their functions as the one Luthier's Mercantile has designed. It's beautiful enough for techno-nerds to admire. and simple enough for beginners to easily utilize. It's a well thought out piece of art." www.robinsoninlays.com
Rigid, compact, open base design allows you to clearly see your work area. The ridges machined into the base make it easy to hold and move, and the straight sides allow for the easy use of a fence.
Plunge slider makes for quick, precise, repeatable plunge movement with no need for locking - just slide/plunge and cut. There is an easy access fine depth adjustment making on-the-fly depth changes a breeze. The counter-balance springs provide just the right amount of spring action to offset the tool being used.
An anti-vibration system assures there is no slop in the depth of cut adjustments. The anti-vibration adjustment prevents tool vibration from affecting the fine depth adjustment and altering the depth of cut - no locking!
Maintenance-free graphite dry-lubricated linear bearings keep the plunge action from binding.
Our plunge base supports 3 popular rotary tools – Dremel, Foredom #30 handpiece, and Proxxon. Because the Dremel adaptor is threaded and not the RTPB itself, the Dremel tool can be oriented so that the power switch is in a convenient position. The Proxxon adaptor is a simple sleeve and the Foredom tool needs no adaptor meaning all tool orientations can be changed easily.
Foredom - No adapter is needed with Foredom #30 handpiece (drill chuck) as the bases body clamp is 1.00" diameter
Dremel - Dremel adapter reduces clamp dia to 3/4" and is threaded to Dremel standard thread 3/4"-12
Proxxon - Proxxon adapter reduces the clamp dia to 20mm for direct clamping of tool nose
We also sell a 1.00" diameter blank RTPBADAPBL that can be modified to fit customers' specific tool requirements. There is an in-depth video showing the how-to for this adaptor on the product page (see recommended products below).
Video: The LMI Rotary Tool Plunge Base.
- Shipping Restrictions - Location
- No Restrictions
- Tool Type or Function