HB pickup ring, cream plastic, flat wedge, short
Our plastic pickup rings are the industry standard pickup rings for standard double coil humbuckers.
The flat rings are wedged to accommodate neck angle. The bottom profile of these rings can be modified to match just about any guitar buy placing sandpaper on the face of the guitar and sanding the ring to match. If you are doing this on finished instruments, be sure to protect the finish.
The thickness of the arched rings is essentially the same as the flat rings at the corners. These rings are then arched along the lengthwise direction for carved top guitars
- Gibson-style bridge configurations typically call for one short (neck position) and one tall (bridge position) pickup ring.
- Fender-style bridge configurations typically call for two short rings.
NOTE: We have attempted to clearly illustrate the color on our cream pickup rings.
Please check for color comparison to the instruments you're working on.
Outside dimension: 3.53" x 1.75" (89.6mm x 44.4mm)
Inside dimension: 2.7" x 1.50" (70.2mm x 38.1mm)
Short wedge taper: .235" - .165"
- Shipping Restrictions - Location
- No Restrictions