Drill block for Headstock Drilling/Slotting Jig, 6mm posts, no bushings
This drill block is meant to be used with the LMI Headstock Drilling and Slotting Jig. It is designed to be used to drill holes for tuners with 6mm posts. One drill block is included with the jig. A .246" (D) drill bit should be used with this drill block. See the photo below for a further explanation of which drill block/bit to use when drilling for your slot-head tuners.
This item is not meant to be used as a stand-alone drill guide.
- Shipping Restrictions - Location
- No Restrictions
- Tool Type or Function
- Slot/Drill Peghead