Products

Testimonials

“I have seldom had
experience with
a company with
such careful attention
to customer
satisfaction.
Although I am sure
my orders are
smaller than most,
your products have
been of the highest
quality and your
responsiveness to
my special requests
have always been
treated with
respect and
timeliness. 
My thanks to
all of your staff."

Dave S.,
Cape Elizabeth, Maine


Gotoh, 3-on-a-plate, slot-head, gold plate, ivoroid buttons

SKU: GGSR

  • GGSR14:1 gear ratio
  • Requires a 9/32" post hole if included bushings are used 15/64" if bushings are not used.*
  • 3L/3R on a plate
  • Screws and bushings included

*NOTE: If you use the bushings supplied with these tuners use a 9/32" - 19/64" drill bit. You need to drill a test hole first as drill bits vary in size from their advertised spec. The bushing should fit snugly, but not too tight so as to crack your peghead. If you don't use the bushings and insert the tuners directly into wood, you need 15/64" or B drill bit. Again, you need to test on a piece of scrap material to ascertain that the fit is right.

See schematics



SKU Product Name In Stock Each 3+  
GGSR Gotoh, 3-on-a-plate, slot-head, gold plate, ivoroid buttons Yes $88.31 $78.60