I recently ordered a couple of Bearclaw Sitka guitar tops and I wanted to let you know that not only did they arrive safe and sound but they are beautiful. Amazing figure! Having been less than satisfied with some wood suppliers over the years it's comforting to know that LMII has consistently come across in both quality and integrity. I never have to worry and that's a wonderful thing!

Thanks again,
Marc Beneteau

CrystaLac Waterborne Finish


Brite Tone Instrument Finish by Crystalac is a high solids, super hard, scratch resistant, clear finish with exceptional clarity. Brite Tone will build very quickly due to its high solids content and will not leave a blue cast on dark exotic wood. Brite Tone adheres to wood, metal, and glass.

  • Water clean up - All brushes can be cleaned with water
  • Easy to use - Can be brushed or sprayed - self-leveling
  • Environmentally safe, low V.O.C.s, No toxic chemicals used and no noxious paint odor
  • Quick Drying - Dries in 1 to 2 hours. Can be re-coated every 2 - 3 hours depending on conditions and with thin, even coats
  • Scratch and chemical resistant
  • Made in the USA

CrystaLac Sanding sealer can be used on bare wood to seal wood fibers and bring out the natural color in the wood grain. Apply one to two coats of CrystaLac Sanding Sealer to bare or previously coated wood. Sand and then apply a topcoat.


SDS Brite Tone Finish

SDS CrystaLac Sanding Sealer


SKU Product Name In Stock Each  
FLCL32 CrystaLac Brite Tone Waterborne Finish, 32 ounce Yes $45.00
FLCL16 CrystaLac Brite Tone Waterborne Finish, 16 ounce Yes $35.00
FLCL8 CrystaLac Brite Tone Waterborne Finish, 8 ounce Yes $22.00
FLSS16 CrystaLac Waterborne Sanding Sealer, 16 ounce Yes $20.00
FLSS8 CrystaLac Waterbourne Sanding Sealer, 8 ounce Yes $13.00