Truss rod U-channel, 15" x 3/8" (overall length 16.2")
Unlike other u-channel truss rods on the market, our one-way aluminum channel rod is a drop-in replacement for vintage Martin guitars. Of course, it is also great for new instruments. This truss rod is meant for soundhole (vs. peghead) adjustment. The rod is installed with the tape side down and the flat surface of the rod almost kissing the fingerboard. The tape should not be removed as it acts as a glue barrier.
The hex wrench is sold separately.
- Overall length: 411mm/16.2"
- Rod length not including the nut: 381mm/15"
- Nut thread: 5mm x .8
- Hex wrench required: 5mm
- Rod in the channel: 5mm
- Shipping Restrictions - Location
- No Restrictions
- 411mm or 16"
- 11mm or 27.9cm
- 9mm or .35"
- Single Action U-Channel