TRSD

Truss rod double action welded, 14 1/2" x 3/8" (overall length 15 1/2")

$32.27

Protected by U.S. Patent No. 6,259,008, this is the best rod on the market in our humble opinions. The square stock bears against the bottom of the fingerboard, so no filler strip is necessary. Turn the nut one way and the rod bows one direction, turn the nut the other way, the rod bows the other direction! With this rod, the nut is actually welded onto the adjusting rod which has been right-hand threaded on one end and reverse threaded the other. The bottom, round rod is covered with heat-shrink tubing to protect against rod buzz. This rod requires a slot 1/4" wide x 3/8" deep. The bar-stock dimensions and the round-stock OD with the heat-shrink tubing are the same and that makes for easy installation. 

Quantity discounts

Quantity You Save
3 $10.65
Quantity


In Stock

Attachments

Product Description

 

Please Note: With the exception of the TRMR made in Japan, all of the truss rods we carry are made, inspected and tested in the USA. Still, we urge you to carefully inspect each rod you receive to make sure it meets your specifications. Once installed, a truss rod can be extremely difficult to replace or repair. Put each rod in a vise and turn the nut beyond its normal range of adjustment (turn it both ways if it is a two-way rod). As with all of our products, LMI is not responsible for any effect of a defective truss rod, or any related costs, beyond the price of the truss rod itself. In keeping with our return policy, we are happy to replace or refund the cost of any rod that you are not happy with. Please call for a return authorization number within 2 weeks of receiving your order. Modification of the rod in any way voids your warranty.

NOTE: Hex wrenches are not included with truss rod

Details

Shipping Restrictions - Location
No Restrictions
Length
14 1/2" or 36.8cm
Configuration
Double Action, Welded Nut
Diameter
3/8" or 9.5mm

Recommended Products

Reviews

No customer reviews for the moment.

Write your review

Truss rod double action welded, 14 1/2" x 3/8" (overall length 15 1/2")

Protected by U.S. Patent No. 6,259,008, this is the best rod on the market in our humble opinions. The square stock bears against the bottom of the fingerboard, so no filler strip is necessary. Turn the nut one way and the rod bows one direction, turn the nut the other way, the rod bows the other direction! With this rod, the nut is actually welded onto the adjusting rod which has been right-hand threaded on one end and reverse threaded the other. The bottom, round rod is covered with heat-shrink tubing to protect against rod buzz. This rod requires a slot 1/4" wide x 3/8" deep. The bar-stock dimensions and the round-stock OD with the heat-shrink tubing are the same and that makes for easy installation. 

Write your review