CMTTLBX

Classical Mold and Template Toolbox - price dependent on choices

$0.00

Order the molds and templates associated with the instrument type you're building. You can make your choices in one location and get a discount at the same time!

This toolbox set is built around the PL28 Ramirez plan but the size is also very close to the PL40 and PL64 Hauser plans. 

Product Description

Don't forget to save your customization to be able to add to cart
  • 250 char. max
  • 250 char. max
  • 250 char. max
  • 250 char. max
  • 250 char. max
  • 250 char. max
  • 250 char. max
  • 250 char. max
  • 250 char. max
  • No selected file .png .jpg .gif
  • No selected file .png .jpg .gif
  • 250 char. max
Quantity


In Stock

Click on the choices below to customize your product

You need to order a minimum of three items here which will give you the discount. From there on the discount applies to all items ordered in this toolbox!

You can't add more than 0 quantities

You must add a minimum of 3 quantities

  • Plan, 1966 Ramirez classical guitar (ref: PL28)

    Scott Antes, as is typical of his style, offers a clean, well-done, and authentic Ramirez plan.

    $13.00
    Plan, 1966 Ramirez classical guitar (ref: PL28)

    $13.00
  • Acrylic template, classical, 1966 Ramirez (ref: SPT1)

    Each of our complete body templates is the precise outline of the guitar based on the plan referenced. Each has the top bracing and bridge placement etched on the template with holes cut to allow the braces pattern to be easily transferred to your top. The soundhole is cut out as well for easy transfer to your top. These templates are laser engraved from 1/8" thick clear "cell cast" acrylic (less brittle than extruded acrylic). It's useful when grading wood (for seeing if a defect in a piece of wood falls outside of your pattern area) and when making jigs and bending forms.

    $37.08
    Acrylic template, classical, 1966 Ramirez (ref: SPT1)

    $37.08
  • Guitar mold, classical for mortise/tenon neck (Ramirez) (ref: MOLD1)

    MOLD1 is based on our PL28 1966 Ramirez classical guitar plan drawn by Scott Antes. This mold is for builders who decide to incorporate a bolt-on or dovetail neck joint into their instrument rather than the traditional Spanish heel. The SPT1 is the corresponding acrylic guitar template.

    $104.79
    Guitar mold, classical for mortise/tenon neck (Ramirez) (ref: MOLD1)

    $104.79
  • Mold and shoe set - Classical, for LMI bending machine (ref: SPMOLD1)

    LMI's classical mold is made to specifically match the PL28 Ramirez plan, but the shape is very close to the PL40 Hauser plan and the PL64 Hauser plan. These plans are compared in the images at left.

    One mold is included with the bending machine, but additional molds can be purchased separately.

    $56.79
    Mold and shoe set - Classical, for LMI bending machine (ref: SPMOLD1)

    $56.79
  • Acrylic template, classical, 1966 Ramirez, headstock (ref: SPTHS1)

    Each of our headstock templates is the precise outline of the headstock on the plan referenced. These templates are laser engraved from 1/8" thick clear "cell cast" acrylic (less brittle than extruded acrylic). This template is designed to be used with a mechanical pencil - specifically, the Graphgear 500 - although others might work. The 0.09mm x 4mm Graphgear sleeve is longer than most mechanical pencils. It is made specifically for templates. 

    $8.95
    Acrylic template, classical, 1966 Ramirez, headstock (ref: SPTHS1)

    $8.95
  • Slotting template, 660mm and 650mm, classical and flamenco (ref: SPFS3)

    Our polycarbonate templates are resistant to breakage, unlike cheaper acrylic versions, and are CNC milled to tolerances of .002"—accuracy is guaranteed! Designed to work with either of our fret slotting systems, power or manual. Note that each template has two scales and has at least twenty-four frets (most have more than thirty slots), and they can be used for other scales you might wish to generate.

    $39.26
    Slotting template, 660mm and 650mm, classical and flamenco (ref: SPFS3)

    $39.26
Clear selection

Overview

Total :

Share your customization with your firends

Product Description

Details

Shipping Restrictions - Location
No Restrictions

Reviews

No customer reviews for the moment.

Write your review

Classical Mold and Template Toolbox - price dependent on choices

Order the molds and templates associated with the instrument type you're building. You can make your choices in one location and get a discount at the same time!

This toolbox set is built around the PL28 Ramirez plan but the size is also very close to the PL40 and PL64 Hauser plans. 

Write your review