OMMTTLBX

OM/000 Mold, Template, and Plan Toolbox - price dependent on choices

$0.00

Order the molds and templates associated with the instrument type you're building. You can make your choices in one location and get a 10% discount at the same time!

Product Description

Don't forget to save your customization to be able to add to cart
  • 250 char. max
  • 250 char. max
  • 250 char. max
  • 250 char. max
  • 250 char. max
  • 250 char. max
  • 250 char. max
  • 250 char. max
  • 250 char. max
  • No selected file .png .jpg .gif
  • No selected file .png .jpg .gif
  • 250 char. max
Purchase this quantity to...

In Stock

Click on the choices below to customize your product

Chrome / Firefox browsers are highly recommended. Internet Explorer is not recommended!

You need to order a minimum of three (3) items here which will give you the 10% discount. From there on the discount applies to all items ordered in this toolbox!

If you order a guitar mold or a bending mold, domestic shipping is restricted to GROUND SHIPPING ONLY. This item cannot be expedited due to its large or heavy nature.

You can't add more than 0 quantities

You must add a minimum of 3 quantities

  • Item Details

    Plan, Orchestra model, similar to Martin OM (ref: PL34)

    by Scott Antes

    The plan on this page answers the call to those requesting a plan for a smaller guitar. Drawn by Scott Antes, a mechanical engineer by training, with a long history of instrument building, his experience and expertise are well illustrated in these fine plans.

    $13.91
    Plan, Orchestra model, similar to Martin OM (ref: PL34)

    $13.91
  • Item Details

    Plan, cutaway Orchestra model, similar to Martin OM (ref: PL34C)

    by Scott Antes

    The plan on this page answers the call to those requesting a plan for a smaller guitar. Drawn by Scott Antes, a mechanical engineer by training, with a long history of instrument building, his experience and expertise are well illustrated in these fine plans.

    $13.91
    Plan, cutaway Orchestra model, similar to Martin OM (ref: PL34C)

    $13.91
  • Item Details

    Acrylic template, Orchestra Model (OM), Martin-style (ref: SPT13)

    Each of our complete body templates is the precise outline of the guitar based on the plan referenced. Each has the top bracing and bridge placement etched on the template with holes cut to allow the braces pattern to be easily transferred to your top. The soundhole is cut out as well for easy transfer to your top. These templates are laser engraved from 1/8" thick clear acrylic (less brittle than extruded acrylic). It's useful when grading wood (for seeing if a defect in a piece of wood falls outside of your pattern area) and when making jigs and bending forms.

    $39.67
    Acrylic template, Orchestra Model (OM), Martin-style (ref: SPT13)

    $39.67
  • Item Details

    Acrylic template, Orchestra Model (OM), Martin-style partial, cutaway made to work with SPT13 (not a stand alone template). (ref: SPT13CP)

    This is a partial cutaway template made to work with the SPT13 acrylic template. This is not a stand-alone template. These templates are laser engraved from 1/8" thick clear acrylic (less brittle than extruded acrylic).

    $10.96
    Acrylic template, Orchestra Model (OM), Martin-style partial, cutaway made to work with SPT13 (not a stand alone template). (ref: SPT13CP)

    $10.96
  • Item Details

    Guitar mold, OM (ref: MOLD13)

    MOLD13 is based on the PL34 OM (orchestra model, very similar to a 000) guitar plan drawn by Scott Antes The SPT13 is the corresponding acrylic guitar template.

    $120.50
    Guitar mold, OM (ref: MOLD13)

    Domestic shipping is restricted to GROUND SHIPPING ONLY. This item cannot be expedited.

    $120.50
  • Item Details

    Mold and shoe set - OM/000, for LMI bending machine (ref: SPMOLD13)

    LMI's OM/000 mold is made to specifically match the PL34 Scott Antes plan, but the shape is very close to the PL31 auditorium style plan.. These plans are compared in the images at left.

    One mold is included with the bending machine, but additional molds can be purchased separately.

    Our bending molds are undersized by 0.200" (5mm) to allow for the slat/wood/blanket/slat stack height and wood spring back so don't expect them to match the plans or templates exactly.

    $60.77
    Mold and shoe set - OM/000, for LMI bending machine (ref: SPMOLD13)

    $60.77
  • Item Details

    Acrylic neck carving template, Orchestra Model (OM), Martin™-style (ref: SPT13N)

    Our neck carving templates are great for new builders who are feeling unsure about carving their own neck. This template has the contours of the neck, derived from the referenced plan at 3 locations along the neck - the head, center, and heel of the neck. This template also includes the heel cap shape that can be easily transferred to the heel by pencil or marking knife. These templates are laser engraved from 1/8" thick clear acrylic (less brittle than extruded acrylic).

    $10.96
    Acrylic neck carving template, Orchestra Model (OM), Martin™-style (ref: SPT13N)

    $10.96
  • Item Details

    Headstock template, OM/000, acrylic (ref: SPTHS13)

    Each of our headstock templates is the precise outline of the headstock on the plan referenced. These templates are laser engraved from 1/8" thick clear acrylic (less brittle than extruded acrylic). This template is designed to be used with a mechanical pencil - specifically, the Graphgear 500 - although others might work. The 0.09mm x 4mm Graphgear sleeve is longer than most mechanical pencils. It is made specifically for templates.

    NOTE: this template is virtually identical to the SPTHS3 Parlor template. 

    $9.58
    Headstock template, OM/000, acrylic (ref: SPTHS13)

    $9.58
  • Item Details

    Side template, OM, acrylic (ref: SPTSP13)

    Our side templates are the exact width of the guitar side depicted in the plan. We recommend you profile your sides adding 1/8" to 1/4" width on either side and an inch or two at either end. This extra material can easily be removed later with a plane or when radiusing the sides using a dish. Doing this gives you a little wiggle room when building. 

    These templates are laser engraved from 1/8" thick clear acrylic (less brittle than extruded acrylic). This template is designed to be used with a mechanical pencil - specifically, the Graphgear 500 - although others might work. The 0.09mm x 4mm Graphgear sleeve is longer than most mechanical pencils. It is made specifically for templates.

    We highly recommend you watch the video below before using these templates. 

    $38.47
    Side template, OM, acrylic (ref: SPTSP13)

    $38.47
Clear selection

Overview

Total :

Share your customization with your firends

Product Description

Details

Shipping Restrictions - Location
No Restrictions

Reviews

No customer reviews for the moment.

Write your review

OM/000 Mold, Template, and Plan Toolbox - price dependent on choices

Order the molds and templates associated with the instrument type you're building. You can make your choices in one location and get a 10% discount at the same time!

Write your review

Related Products