Side template, soprano ukulele, acrylic
Our side templates are the exact width of the guitar side depicted in the plan. We recommend you profile your sides adding 1/8" to 1/4" width on either side. This extra material can be easily removed later with a plane or when radiusing the sides using a radius dish. Doing this gives you a little wiggle room when building.
Our ukulele side templates assume that there is neither a dome nor a wedge on the ukulele.
These templates are laser engraved from 1/8" thick clear "cell cast" acrylic (less brittle than extruded acrylic). This template is designed to be used with a mechanical pencil - specifically, the Graphgear 500 - although others might work. The 0.09mm x 4mm Graphgear sleeve is longer than most mechanical pencils. It is made specifically for templates.
- Shipping Restrictions - Location
- No Restrictions
- Tool Type or Function
- Side Templates
- Instrument Type
- Soprano Ukulele
- Plan Reference
- PL51 Soprano Ukulele