Side template, OM, acrylic
Our side templates are the exact width of the guitar side depicted in the plan. We recommend you profile your sides adding 1/8" to 1/4" width on either side and an inch or two at either end. This extra material can easily be removed later with a plane or when radiusing the sides using a dish. Doing this gives you a little wiggle room when building.
These templates are laser engraved from 1/8" thick clear "cell cast" acrylic (less brittle than extruded acrylic). This template is designed to be used with a mechanical pencil - specifically, the Graphgear 500 - although others might work. The 0.09mm x 4mm Graphgear sleeve is longer than most mechanical pencils. It is made specifically for templates.
We highly recommend you watch the video below before using these templates.
This is a two-piece template meaning it is easier to ship and store.
Video: Using LMI Acrylic Side Templates Gauge
- Shipping Restrictions - Location
- No Restrictions
- Tool Type or Function
- Side Templates
- Instrument Type
- Acoustic Steel String
- Plan Reference
- PL34 OM (Similar to Martin OM, very close to 000)