Our side templates are the exact width of the guitar side depicted in the plan. We recommend you profile your sides adding 1/8" to 1/4" width on either side. This extra material can be easily removed later with a plane or when radiusing the sides using a radius dish. Doing this gives you a little wiggle room when building.
Our ukulele side templates assume that there is neither a dome nor a wedge on the ukulele.
These templates are laser engraved from 1/8" thick clear acrylic (less brittle than extruded acrylic). This template is designed to be used with a mechanical pencil - specifically, the Graphgear 500 - although others might work. The 0.09mm x 4mm Graphgear sleeve is longer than most mechanical pencils. It is made specifically for templates.
No customer reviews for the moment.
Our side templates are the exact width of the guitar side depicted in the plan. We recommend you profile your sides adding 1/8" to 1/4" width on either side. This extra material can be easily removed later with a plane or when radiusing the sides using a radius dish. Doing this gives you a little wiggle room when building.
Our ukulele side templates assume that there is neither a dome nor a wedge on the ukulele.
These templates are laser engraved from 1/8" thick clear acrylic (less brittle than extruded acrylic). This template is designed to be used with a mechanical pencil - specifically, the Graphgear 500 - although others might work. The 0.09mm x 4mm Graphgear sleeve is longer than most mechanical pencils. It is made specifically for templates.
