

MOLD8 is based on the PL29 Parlor (small orchestra) guitar plan drawn by Scott Antes. The SPT8 is the corresponding acrylic guitar template.
Note: These molds are machined based on the guitar plans referenced above. The plans themselves may be slightly asymmetrical, and if so, the molds are also asymmetrical. The molds have a top and bottom and
12/23/2021
Gap
Nice mold but there are gaps ellowthe waist on both sides when using the spreaders. I first tought it was intentional when I assembled the mold, that it was a compensation for the radius being 2.2 mm smaller when the sides are in but no, I have 2 perfectly bent sides and there is quite a large gap between the spreaders and the sidesand mold. That is annoying since I ordered 3 molds and they are all like that, unless I'm missing something?