Tailblock, Honduran Mahogany, 5" x 3" x 7/8"
The end block is the block that stabilizes the end of the guitar where the sides meet at the lower bout. The long edges of the block can be chamfered for an attractive look on the inside of your guitar.
This size of these blocks may not necessarily match your plan, but this is a non-critical dimension. This block is essentially for reinforcement of the side seam and it can be slightly over or under-sized.
NOTE: The grain of end block follows the grain of the sides.
- Wood Species
- Honduran Mahogany
- Shipping Restrictions - Location
- USA Only
- 5" or 12.7cm
- 3" or 7.6cm
- 7/8" or 22.2mm