CS79G

Shell purfling, curved shell strips, green abalone, .079"/2.0mm wide, each

$2.13

These curved strips are cut to a 4.92" I.D. (approx. 4 15/16" or 125mm) - about 15 per soundhole. They will work with no visible misfit on diameters somewhat larger or smaller as well and will give better results than straight strips when going around tight body curves as found in some guitar cutaways.

Shell strips are sold by the linear inch. Each strip measures approximately an inch so the amount you order won't necessarily equal the number of pieces you receive.

 

Quantity


In Stock

Product Description

The traditional method to install shell purfling has been to install a Teflon strip along with the purfling elements and then, when all is dry and set-up, the Teflon is removed, leaving an open channel into which shell strips are inlaid. 

As with all items being inlaid, wait to rout until your item arrives.

Details

Color/Scheme
Shell
Shipping Restrictions - Location
USA Only
Length
1" or 25.4mm
Height
.050" or 1.2mm
Width
.079" or 2mm
Configuration
Curved Strips - Slab (short)
Content
Green Abalone

Reviews

No customer reviews for the moment.

Write your review

Shell purfling, curved shell strips, green abalone, .079"/2.0mm wide, each

These curved strips are cut to a 4.92" I.D. (approx. 4 15/16" or 125mm) - about 15 per soundhole. They will work with no visible misfit on diameters somewhat larger or smaller as well and will give better results than straight strips when going around tight body curves as found in some guitar cutaways.

Shell strips are sold by the linear inch. Each strip measures approximately an inch so the amount you order won't necessarily equal the number of pieces you receive.

 

Write your review