CA187DNS

Router bit, ball end, carbide, 3/16" cut, 3/16" shank

$23.93

Our small diameter spiral bits are high quality, two flute, solid carbide cutters – made for long useful operation. The 1/8" shank cutters are usually used in a small Dremel type rotary tools and 1/4" shank cutters are typically used in a laminate trimmer or router.

For 3/16" truss rod slots. Use the HSSCL 3/16" split bushing adaptor for 1/4" collet.

Quantity


Product Description

Details

Shipping Restrictions - Location
No Restrictions
Length
2" or 5cm
Tool Type or Function
Routing
Shank Diameter
3/16" or 4.7mm
Cutter Diameter
.187" or 3/16" or 4.7mm
Length of Cut
11/16" or 17.4mm
Router Bit Profile
Downcut

Reviews

No customer reviews for the moment.

Write your review

Router bit, ball end, carbide, 3/16" cut, 3/16" shank

Our small diameter spiral bits are high quality, two flute, solid carbide cutters – made for long useful operation. The 1/8" shank cutters are usually used in a small Dremel type rotary tools and 1/4" shank cutters are typically used in a laminate trimmer or router.

For 3/16" truss rod slots. Use the HSSCL 3/16" split bushing adaptor for 1/4" collet.

Write your review

Recommended Products