German peghole reamer
Our German peghole reamer is essential for builders who employ friction pegs, and virtually a necessity for those who use Schallers™, Gotohs™, Grovers™, and most tuning machines where either the bushings or the barrels are 10mm (3/8") in diameter. This reamer has three blades on one side working against the opposite smooth side. This configuration gives the roundest hole. (Fully-bladed and half-cone types of reamers tend to make rough cuts and eccentric holes.) It's the only reamer we've seen that's titanium-nitride coated; the life of the blade is extended from 3-5 times! Because the friction coefficient is less, cutting is cleaner and easier.
- 10mm tapering to 5.5mm
- 135mm long
- Taper: 1/30 or approximately a 2 degree taper
- Shipping Restrictions - Location
- No Restrictions
- Tool Type or Function