SPH50

50 grit disc sandpaper for radiused dishes

$43.74

Radiused dishes (also called Hollow Forms) are mostly used when bracing the top or back in either a Go-bar deck or vacuum bracing fixture to achieve an arch or “dome” in that plate. Arched tops are believed to be stronger for their mass than flat tops, to react less due to humidity changes, and to distort less due to the pull of the strings.

Purchase this quantity to...



There are not enough products in stock

Product Description

To easily achieve a uniformly arched plate you need to contour the bottom of the braces to the appropriate arch. This can be accurately accomplished by cutting, then sanding the braces on sandpaper attached to the radiused dish. Next, glue the braces down to the plate while it is in the dish.

Our radiused dishes are 3D modeled in CAD and CNC machined (spherically) to tight tolerances. They are made from lightweight MDF (medium density fiberboard). All forms will spring and will need to be flat-mounted to return the form to the intended radius. To do this we recommend that your radius dish is clamped, glued or screwed to a piece of plywood or the base of your go-bar deck.

Details

Shipping Restrictions - Location
No Restrictions
Size
23 1/4" diameter
Brand
VSM Abrasives
Grit
50 grit
Material
Aluminum Oxide
Tool Type or Function
Radiusing Tops & Braces
Tool Type or Function
Radiusing Backs & Braces

Reviews

No customer reviews for the moment.

Write your review

50 grit disc sandpaper for radiused dishes

Radiused dishes (also called Hollow Forms) are mostly used when bracing the top or back in either a Go-bar deck or vacuum bracing fixture to achieve an arch or “dome” in that plate. Arched tops are believed to be stronger for their mass than flat tops, to react less due to humidity changes, and to distort less due to the pull of the strings.

Write your review