NKHMDDHLS

Mahogany, dovetail carved neck, 25.4/ 25.5", deep Martin-style heel, diamond volute

$210.90

All our pre-carved Honduran Mahogany necks are CNC (computer numerically controlled) routed from quartersawn wood ensuring accuracy and consistency. Compare the machining to the necks of our competitors, it's far superior! The oversized peghead allows the builders to customize their peghead thickness and shape. The peghead on all this neck has industry standard glued wings on the peghead that are virtually invisible. We recommend our TRSD truss rod with this neck. The diamond volute (pictured) is decorative, but also adds a bit of mass at a structurally weaker point on the neck. It can be filed off you prefer.

Quantity


In Stock

Product Description

The heel face on this Martin™-style neck measures 1.100" wide and .890" tall and has a cathedral shape.

  • Heel depth - 3.8"
  • Width at the nut - 1.875"
  • Width at 14th fret - 2.3"
  • Width at top of peghead - 3.4"
  • Length of peghead - 6.9"
  • Thickness of peghead -0.5"

When fitting the dovetail, the neck should be about 3/8" proud of the heel block. This gives you more room to maneuver to get the centerline and angle just right, once the sides are attached. (The dovetail-mortise fit should not be a "glove fit" as you get it from us.) Work the shoulders of the neck first; use carbon (articulating) paper, and sandpaper to mark and pare away. The dovetails on our precarved necks are French dovetails with a 2 1/2° taper cut into the heel.

Details

Wood Species
Honduran Mahogany
Shipping Restrictions - Location
No Restrictions
Scale Length
25.4"/25.5" or 645.2mm/647.7mm scale length
Neck Attachment
Dovetail
Heel Depth
Deep - Dreadnought
Frets to Body
14 frets to the body

Recommended Products

Reviews

No customer reviews for the moment.

Write your review

Mahogany, dovetail carved neck, 25.4/ 25.5", deep Martin-style heel, diamond volute

All our pre-carved Honduran Mahogany necks are CNC (computer numerically controlled) routed from quartersawn wood ensuring accuracy and consistency. Compare the machining to the necks of our competitors, it's far superior! The oversized peghead allows the builders to customize their peghead thickness and shape. The peghead on all this neck has industry standard glued wings on the peghead that are virtually invisible. We recommend our TRSD truss rod with this neck. The diamond volute (pictured) is decorative, but also adds a bit of mass at a structurally weaker point on the neck. It can be filed off you prefer.

Write your review