Indian Rosewood fingerboard 1/4" thick, 1st grade, 25.5" scale, 12" radius, 22 frets
CNC slotted for accuracy. Don't see what you want? Use our custom fingerboard slotting service where you can order any scale from 8-40".
We typically leave 1" behind the nut slot on these fingerboards, but we goofed on these, so if you don't need an inch behind the nut, you can save a couple of bucks when purchasing them.
The boards are CNC slotted with a nut slot offset to correct for fret saw blade kerf for compensation purposes so that the bridge edge of the slot is at true zero. This method of slotting works well for most builders. To bring the breakaway point of the nut slot closer to the bridge, it is easy to file away the amount of material desired. This method will not allow a zero fret.
The slots on radiused boards follow the radius.
- Wood Species
- Indian Rosewood
- Shipping Restrictions - Location
- USA Only
- 1st Grade
- Steel String/Electric
- 20" or 50.8cm
- 2 1/2" or 6.3cm
- 1/4" or 6.3mm
- Slotted & Radiused Fingerboard
- Scale Length
- 25.5" or 647.7mm scale length
- Number of Fret Slots
- 22 fret slots
- 12" radius