Maple fingerboard 1/4" thick, 1st grade, 25.5" scale, 9.5" radius, 22 frets, Fender nut slot
CNC slotted for accuracy. Don't see what you want? Use our custom fingerboard slotting service where you can order any scale from 8-40".
The boards are CNC slotted with a nut slot offset to correct for fret saw blade kerf for compensation purposes so that the bridge edge of the slot is at true zero. This method of slotting works well for most builders. To bring the breakaway point of the nut slot closer to the bridge, it is easy to file away the amount of material desired. This method will not allow a zero fret.
The slots on radiused boards follow the radius. The 1/8" Fender nut slot is flat to accommodate the nut. 7/8" of wood is left behind the nut.
- Wood Species
- Slotted and Radiused
- Shipping Restrictions - Location
- No Restrictions
- 1st Grade
- Steel String/Electric
- 20" or 50.8cm
- 2 1/2" or 6.3cm
- 1/4" or 6.3mm
- Scale Length
- 25.5" or 647.7mm scale length
- Number of Fret Slots
- 22 fret slots
- 9.5" radius