W African Ebony fingerboard 1/4" thick, 1st grade, 13.5" scale, 12 frets
CNC slotted for accuracy. Don't see what you want? Use our custom fingerboard slotting service where you can order any scale from 8-40".
This pre-slotted board is intended for a ukulele. If you want this scale for a mandolin board, you can order a customized board. To do so, go to the size and species of the fingerboard you want and customize from there.
The boards are CNC slotted with a nut slot offset to correct for fret saw blade kerf for compensation purposes so that the bridge edge of the slot is at true zero. This method of slotting works well for most builders. To bring the breakaway point of the nut slot closer to the bridge, it is easy to file away the amount of material desired. This method will not allow a zero fret.
- Wood Species
- Ebony - West African
- Shipping Restrictions - Location
- No Restrictions
- 1st Grade
- 12" or 30.4cm
- 2" or 5.1cm
- 1/4" or 6.3mm
- Slotted Fingerboard
- Scale Length
- 13.5" or 342.9mm scale length
- Number of Fret Slots
- 12 fret slots