FBPA16STR

Padauk fingerboard 5/16" thick, 1st grade, 6 string bass

$43.61

Padauk is a bright orange or almost crimson wood when freshly cut, but oxidizes to a darker, rich purple-brown over time - although it stays redder than Indian Rosewood. Slightly harder and heavier than Indian Rosewood it is stable, easy to work.

Would you like us to slot and/or thickness sand your fingerboard? Choose fingerboard customizations below. Due to our production set up, LMI cannot radius 6 string fingerboards. 

Product Description

Don't forget to save your customization to be able to add to cart
  • 250 char. max
  • 250 char. max
  • 250 char. max
  • 250 char. max
  • 250 char. max
  • 250 char. max
  • 250 char. max
  • 250 char. max
  • 250 char. max
  • 250 char. max
  • No selected file .png .jpg .gif
  • No selected file .png .jpg .gif

Quantity discounts

Quantity You Save
3 $4.80
Quantity


In Stock

Attachments

Fingerboard Calculator

Fret Scale and Fingerboard Length Calculator

Click on the choices below to customize your product

READ!!! You must enter a scale length here or we will not be able to process your order!

Enter a scale length between 8" and 40". Use the fingerboard calculator in our Help Center to be sure your choices will fit on the board you chose.

If you choose to have your fingerboard slotted, you must make a selection in the remaining fingerboard customizations as well. If you do not make choices, we will choose the following for you: Slot Depth - .095", Nut Slot Position - Standard Nut Slot Position, Nut Slot Offset - 1/8" behind the nut. 

To convert mm to inches, divide the mm by a factor of 25.4. Ex: 660mm divided by 25.4 equals  25.98" inches. 

Enter the number of fret slots desired (not including the nut slot). Use the fingerboard calculator attached (above) to make sure you have chosen a long enough board for the scale and number of frets that you have chosen.

You can't add more than 1 quantities

You must add a minimum of 0 quantities

  • 10 fret slots (ref: SVNF10)

    $0.00
    10 fret slots (ref: SVNF10)

    $0.00
  • 11 fret slots (ref: SVNF11)

    $0.00
    11 fret slots (ref: SVNF11)

    $0.00
  • 12 fret slots (ref: SVNF12)

    $0.00
    12 fret slots (ref: SVNF12)

    $0.00
  • 13 fret slots (ref: SVNF13)

    $0.00
    13 fret slots (ref: SVNF13)

    $0.00
  • 14 fret slots (ref: SVNF14)

    $0.00
    14 fret slots (ref: SVNF14)

    $0.00
  • 15 fret slots (ref: SVNF15)

    $0.00
    15 fret slots (ref: SVNF15)

    $0.00
  • 16 fret slots (ref: SVNF16)

    $0.00
    16 fret slots (ref: SVNF16)

    $0.00
  • 17 fret slots (ref: SVNF17)

    $0.00
    17 fret slots (ref: SVNF17)

    $0.00
  • 18 fret slots (ref: SVNF18)

    $0.00
    18 fret slots (ref: SVNF18)

    $0.00
  • 19 fret slots (ref: SVNF19)

    $0.00
    19 fret slots (ref: SVNF19)

    $0.00
  • 20 fret slots (ref: SVNF20)

    $0.00
    20 fret slots (ref: SVNF20)

    $0.00
  • 21 fret slots (ref: SVNF21)

    $0.00
    21 fret slots (ref: SVNF21)

    $0.00
  • 22 fret slots (ref: SVNF22)

    $0.00
    22 fret slots (ref: SVNF22)

    $0.00
  • 23 fret slots (ref: SVNF23)

    $0.00
    23 fret slots (ref: SVNF23)

    $0.00
  • 24 fret slots (ref: SVNF24)

    $0.00
    24 fret slots (ref: SVNF24)

    $0.00
  • 25 fret slots (ref: SVNF25)

    $0.00
    25 fret slots (ref: SVNF25)

    $0.00
  • 26 fret slots (ref: SVNF26)

    $0.00
    26 fret slots (ref: SVNF26)

    $0.00
  • 27 fret slots (ref: SVNF27)

    $0.00
    27 fret slots (ref: SVNF27)

    $0.00
  • 28 fret slots (ref: SVNF28)

    $0.00
    28 fret slots (ref: SVNF28)

    $0.00
  • 29 fret slots (ref: SVNF29)

    $0.00
    29 fret slots (ref: SVNF29)

    $0.00
  • 30 fret slots (ref: SVNF30)

    $0.00
    30 fret slots (ref: SVNF30)

    $0.00
  • 31 fret slots (ref: SVNF31)

    $0.00
    31 fret slots (ref: SVNF31)

    $0.00
  • 32 fret slots (ref: SVNF32)

    $0.00
    32 fret slots (ref: SVNF32)

    $0.00
  • 33 fret slots (ref: SVNF33)

    $0.00
    33 fret slots (ref: SVNF33)

    $0.00
  • 34 fret slots (ref: SVNF34)

    $0.00
    34 fret slots (ref: SVNF34)

    $0.00
Clear selection

Choose a radius for your fingerboard. Classical fingerboards are typically not radiused.

Some fingerboards cannot be radiused. In this case, no options will appear. Radiused boards measure 1/4" at center. 

You can't add more than 1 quantities

You must add a minimum of 0 quantities

  • No (0) radius (ref: SVR0)

    $0.00
    No (0) radius (ref: SVR0)

    $0.00
Clear selection

If you chose to have your fingerboard radiused or don't plan to radius it, choose the shallow slot. If you plan on radiusing your fretboard later, choose the deep slot. 

You can't add more than 1 quantities

You must add a minimum of 0 quantities

  • .095" fret slot depth (ref: SVFSS)

    $0.00
    .095" fret slot depth (ref: SVFSS)

    $0.00
  • .145" fret slot depth (ref: SVFSD)

    $0.00
    .145" fret slot depth (ref: SVFSD)

    $0.00
Clear selection

Choose the nut slot offset. There will be this much wood left behind the nut position. 1/4" is pretty typical. Those building a Fender style guitar will want to choose an inch, so there is wood to taper into the headstock.

You can't add more than 1 quantities

You must add a minimum of 0 quantities

  • .125" space behind the nut (ref: SVFSNO.125)

    $0.00
    .125" space behind the nut (ref: SVFSNO.125)

    $0.00
  • .250" space behind the nut (ref: SVFSNO.25)

    $0.00
    .250" space behind the nut (ref: SVFSNO.25)

    $0.00
  • .375" space behind the nut (ref: SVFSNO.375)

    $0.00
    .375" space behind the nut (ref: SVFSNO.375)

    $0.00
  • .5" space behind the nut (ref: SVFSNO.5)

    $0.00
    .5" space behind the nut (ref: SVFSNO.5)

    $0.00
  • .75" space behind the nut (ref: SVFSNO.75)

    $0.00
    .75" space behind the nut (ref: SVFSNO.75)

    $0.00
  • 1.0" space behind the nut (ref: SVFSNO1)

    $0.00
    1.0" space behind the nut (ref: SVFSNO1)

    $0.00
Clear selection

The Standard nut slot moves the kerf back half the width of the slot. Our slots are .024”, so we move it back .012”. This puts the string’s break away point (the edge of the nut) at “true zero”. The Zero Fret option places the nut slot so that it is centered at the zero point of the scale. This works for those who install a zero fret – a fret at the nut position

You can't add more than 1 quantities

You must add a minimum of 0 quantities

  • Standard nut slot position (ref: SVFSN)

    $0.00
    Standard nut slot position (ref: SVFSN)

    $0.00
  • Zero nut slot position (ref: SVFZN)

    $0.00
    Zero nut slot position (ref: SVFZN)

    $0.00
Clear selection

Enter a thickness. Expect 5% +/- tolerance. We cannot thickness sand radiused fingerboards. Non-radiused boards measure 5/16". Choose this service if you want us to sand your non-radiused board thinner than 5/16". The minimum we can sand to is .187" or 3/16".

You can't add more than 1 quantities

You must add a minimum of 0 quantities

  • Sand unradiused fingerboard to .250" thick (ref: SVFT250)

    $7.00
    Sand unradiused fingerboard to .250" thick (ref: SVFT250)

    $7.00
  • Sand unradiused fingerboard to .187" thick (ref: SVFT187)

    $7.00
    Sand unradiused fingerboard to .187" thick (ref: SVFT187)

    $7.00
Clear selection

Overview

Total :

Share your customization with your firends

Product Description

Details

Wood Species
Padauk
Shipping Restrictions - Location
No Restrictions
Grade
1st Grade
Size
6 String Bass
Length
28" or 71.1cm
Width
3 3/4" or 9.5cm
Thickness
5/16" or 7.9mm

Reviews

No customer reviews for the moment.

Write your review

Padauk fingerboard 5/16" thick, 1st grade, 6 string bass

Padauk is a bright orange or almost crimson wood when freshly cut, but oxidizes to a darker, rich purple-brown over time - although it stays redder than Indian Rosewood. Slightly harder and heavier than Indian Rosewood it is stable, easy to work.

Would you like us to slot and/or thickness sand your fingerboard? Choose fingerboard customizations below. Due to our production set up, LMI cannot radius 6 string fingerboards. 

Write your review