BSPACL_012

B/S Padauk, classical/OM/000

$95.77

Pterocarpus soyauxii

Padauk is a bright orange or almost crimson wood when freshly cut, but oxidizes to a darker, rich purple-brown over time - although it stays redder than Indian Rosewood. Slightly harder and heavier than Indian Rosewood it is a good back and side wood in all respects - stable, easy to work, with a strong tone. It may be a little difficult to bend compared to the ease of bending of some of the more pliable woods.

Quantity


Click on the choices below to customize your product

We will bend your sides based on the option you choose. These options are filtered to work with the back and side set you are purchasing. We are unable to bend a Florentine cutaway.

You can't add more than 1 quantities

You must add a minimum of 0 quantities

  • Bend sides to OM/000 shape based on our PL34 plan (ref: SVSB000)

    $50.00
    Bend sides to OM/000 shape based on our PL34 plan (ref: SVSB000)

    $50.00
  • Bend sides to cutaway OM/000 shape based on our PL34C plan (ref: SVSCUT000)

    $100.00
    Bend sides to cutaway OM/000 shape based on our PL34C plan (ref: SVSCUT000)

    $100.00
  • Bend sides to classical shape based on our PL42/PL64 plan (ref: SVSBC)

    $50.00
    Bend sides to classical shape based on our PL42/PL64 plan (ref: SVSBC)

    $50.00
  • Bend sides to parlor (small orchestra) shape based on our PL29 plan (ref: SVSBP)

    $50.00
    Bend sides to parlor (small orchestra) shape based on our PL29 plan (ref: SVSBP)

    $50.00
  • Bend sides to flamenco shape based on our PL75 plan (ref: SVSBF)

    $50.00
    Bend sides to flamenco shape based on our PL75 plan (ref: SVSBF)

    $50.00
Clear selection

If you have opted to have your sides bent, do not choose any side options here, choose only back customizations. If you are having your sides bent, we recommend: Join back only and sand to .095".

You can't add more than 1 quantities

You must add a minimum of 0 quantities

  • Join back and sand to .095", sand sides to .090" - CHOOSE THIS IF YOU ARE NOT HAVING SIDES BENT (ref: SVBJS)

    $35.00
    Join back and sand to .095", sand sides to .090" - CHOOSE THIS IF YOU ARE NOT HAVING SIDES BENT (ref: SVBJS)

    $35.00
  • Join back only and sand to .095" - CHOOSE THIS IF YOU ARE HAVING SIDES BENT (ref: SVBJ)

    $25.00
    Join back only and sand to .095" - CHOOSE THIS IF YOU ARE HAVING SIDES BENT (ref: SVBJ)

    $25.00
  • Sand unjoined back to .100", sand sides to .090" - CHOOSE THIS IF YOU ARE NOT HAVING SIDES BENT and you don't want your back joined (ref: SVBS)

    $25.00
    Sand unjoined back to .100", sand sides to .090" - CHOOSE THIS IF YOU ARE NOT HAVING SIDES BENT and you don't want your back joined (ref: SVBS)

    $25.00
  • Sand unjoined back only to .100" - CHOOSE THIS IF YOU ARE HAVING SIDES BENT or you don't want sides sanded. Back will not be joined. (ref: SVBOS)

    $15.00
    Sand unjoined back only to .100" - CHOOSE THIS IF YOU ARE HAVING SIDES BENT or you don't want sides sanded. Back will not be joined. (ref: SVBOS)

    $15.00
  • Sand sides only to .090" - choose this if you don't want your back joined or sanded. (ref: SVSOS)

    $15.00
    Sand sides only to .090" - choose this if you don't want your back joined or sanded. (ref: SVSOS)

    $15.00
Clear selection

Choose a backstrip - the feature strip that goes down the back of the guitar. You will be given the option to have it installed in the next step. 

You can't add more than 1 quantities

You must add a minimum of 0 quantities

  • Laminate Backstrips Thumbnail Laminate Backstrips
    View Category

  • Marquetry Backstrips Thumbnail Marquetry Backstrips
    View Category

  • Wood Backstrips Thumbnail Wood Backstrips
    View Category

Clear selection

Have us install your backstrip. You must have chosen a backstrip and asked us to join your back in the previous selections. We sandwich the backstrip in between the back plates rather than rout and inlay. 

If there is not a choice here it is because we are unable to insert a backstrip. This is typically because you have chosen a 3-piece back. 

You can't add more than 1 quantities

You must add a minimum of 0 quantities

  • Insert backstrip (ref: SVBI)

    $5.00
    Insert backstrip (ref: SVBI)

    Backstrips are joined into the back, not routed. 

    $5.00
Clear selection

If you have elected to have us join your back, you may also wish to have us profile it. We will profile your back to the shape you choose leaving approximately 1/4 inch of extra material beyond the outline. This excess material can be removed later, once your box is complete, using a router with a flush trim bit or by other appropriate means. These options are filtered to work with the back and side set you are purchasing. 

You can't add more than 1 quantities

You must add a minimum of 0 quantities

  • Profile joined back to OM/000 shape based on our PL34 plan (ref: SVPBOM)

    $5.00
    Profile joined back to OM/000 shape based on our PL34 plan (ref: SVPBOM)

    $5.00
  • Profile joined back to cutaway OM/000 shape based on our PL34C plan (ref: SVPBCUTOM)

    $5.00
    Profile joined back to cutaway OM/000 shape based on our PL34C plan (ref: SVPBCUTOM)

    $5.00
  • Profile joined back to classical shape based on our PL42/PL64 plan (ref: SVPBC)

    $5.00
    Profile joined back to classical shape based on our PL42/PL64 plan (ref: SVPBC)

    $5.00
  • Profile joined back to parlor (small orchestra) shape based on our PL29 plan (ref: SVPBP)

    $5.00
    Profile joined back to parlor (small orchestra) shape based on our PL29 plan (ref: SVPBP)

    $5.00
  • Profile joined back to flamenco shape based on our PL75 plan (ref: SVPBF)

    $5.00
    Profile joined back to flamenco shape based on our PL75 plan (ref: SVPBF)

    $5.00
Clear selection

Overview

Total :

Share your customization with your firends

Product Description

Details

Select-A-Set
The one you see is the one you get.
Wood Species
Padauk
Shipping Restrictions - Location
No Restrictions
Grade
Mixed
Size
Classical/OM/000 or smaller
Thickness
.120"+ or 3mm+
Back Width
Lower bout 15" or 38cm Upper bout 11 1/4" or 28.57cm
Back Length
20" or 50.8cm
Serial Number
012

Reviews

No customer reviews for the moment.

Write your review

B/S Padauk, classical/OM/000

Pterocarpus soyauxii

Padauk is a bright orange or almost crimson wood when freshly cut, but oxidizes to a darker, rich purple-brown over time - although it stays redder than Indian Rosewood. Slightly harder and heavier than Indian Rosewood it is a good back and side wood in all respects - stable, easy to work, with a strong tone. It may be a little difficult to bend compared to the ease of bending of some of the more pliable woods.

Write your review