Template, mortise and tenon, straight
The LMI mortise and tenon templates are designed to be used with the O'Brien Neck Joint Jig, but they can also be used separately. They are manufactured from 1/4"
The tenon produced will be oversized by approximately 1/16" to allow precise fitting. The tenon can be fit using a chisel or sandpaper.
The SPRB12 straight bit (see below) works well with this tool.
The dimensions of the mortise and tenon prior to fitting them are:
- Mortise - 7/8" (.875")
- Tenon - 15/16" (.938") The tenon is slightly oversized so you can remove just a bit of material and get a perfect fit.
Router bits & template guide bushings are not included.
- Shipping Restrictions - Location
- No Restrictions
- Tool Type or Function