O'Brien straight M/T neck joint routing jig, w/straight template set
Robbie O'Brien - influenced by others - came up with the idea for this clever neck alignment and routing jig. The jig is simple but elegant in the way it helps you determine your correct neck angle and then gives you an easy way to transfer the angle to your neck. It enables you to rout both the mortise and tenon accurately. Only a small amount of fitting is necessary after the routing is done. The jig comes in an unassembled flatpack, but it is relatively easy to assemble with a minimum of tools and glue. The video/article links (below) fully illustrate how to assemble/use the jig and have many helpful hints for making easy work of this often difficult task.
**Router bits and template guides are not included with the jig/templates.
The SPRB12 straight bit (recommended below) works well with this tool.
The dimensions of the mortise and tenon prior to fitting them are:
• Mortise - 7/8" (.875")
• Tenon - 15/16" (.938") The tenon is slightly oversized so you can remove just a bit of material and get a perfect fit.
Router bits & template guide bushing referenced below are not included with the Jig/Templates.
- Shipping Restrictions - Location
- No Restrictions
- Oversized - Shipping Restrictions
- Tool Type or Function
No customer reviews for the moment.