Top radius template, 25 foot
Our clear acrylic top and back radius templates are concave on one side and convex on the other and are used to verify top and back arching throughout the body assembly process. The convex side can be used to check the top and back arching while they are still separate from the sides, and the other side can be used to check the top and back arching of assembled instruments. They are also great to use as a template for brace production.
Simple to use: Say you want to lower the action by a certain amount. Measure the height of the low E string over the 12th fret. If you want to lower the action by 1/32", you remove twice as much from the bottom of the saddle, 1/16". Place the saddle in the groove stamped 1/16", mark it with a sharp pencil on both sides and sand on the belt sander or use a file.
Note: The thickness of the gauge itself, 1/4", also serves as a depth stop, giving you a total of five different depths.
- Shipping Restrictions - Location
- No Restrictions
- 18" or 45.7cm
- 3/16" or 4.7mm
- Tool Type or Function
- Radius Templates