Birdseye Maple fingerboard 5/16" thick, subtle figure, steel string/electric, flatsawn
  • Birdseye Maple fingerboard 5/16" thick, subtle figure, steel string/electric, flatsawn
FBBEELSB

Birdseye Maple fingerboard 5/16" thick, subtle figure, steel string or electric, flatsawn

$21.83

Far more stable than flamed Maple, these are the only way to go if you want to dress up your electric guitar.

Unfortunately, due to the manufacturing process we use, we are unable to radius Birdseye Maple fingerboards. We use a shaper/molder type tool to radius our boards and the grain of Birdseye Maple tears out when attempting to radius it. Our radius blocks work well for this task.

Would you like us to slot and/or thickness sand your fingerboard? Choose fingerboard customizations below.

Product Description

Don't forget to save your customization to be able to add to cart
  • 250 char. max
  • 250 char. max
  • 250 char. max
  • 250 char. max
  • 250 char. max
  • 250 char. max
  • No selected file .png .jpg .gif
  • No selected file .png .jpg .gif
  • 250 char. max
  • 250 char. max
  • 250 char. max
  • 250 char. max
  • 250 char. max
  • 250 char. max
  • 250 char. max
  • 250 char. max
  • 250 char. max

SAVE $$ - Quantity discounts

Purchase this quantity to... save this much:
3 $7.22
Purchase this quantity to...

In Stock

Click on the choices below to customize your product

Chrome / Firefox browsers are highly recommended. Internet Explorer is not recommended!

Enter a scale length between 8" and 40". If you want a fretless board you don't need to make a choice. For radiusing only go directly to #3. For thicknessing only go directly to #7. 

Use the fingerboard calculator in our Help Center to be sure your choices will fit on the board you chose. 

If you choose to have your fingerboard slotted, you must make a selection in the remaining fingerboard customizations as well. If you do not make choices, we will choose the following for you: Slot Depth - .095", Nut Slot Position - Standard Nut Slot Position, Nut Slot Offset - 1/8" behind the nut. 

To convert mm to inches, divide the mm by a factor of 25.4. Ex: 660mm divided by 25.4 equals  25.98" inches. 

Please allow 3 business days to process customized fingerboards. 

Enter the number of fret slots desired. Use the fingerboard calculator to make sure you have chosen a long enough board for the scale and number of frets that you have chosen.

You can't add more than 1 quantities

You must add a minimum of 0 quantities

  • Item Details

    0 fret slots - Fretless (RADIUSED ONLY) fingerboard

    $0.00
    0 fret slots - Fretless (RADIUSED ONLY) fingerboard

    $0.00
  • Item Details

    10 fret slots (ref: SVNF10)

    $7.00
    10 fret slots (ref: SVNF10)

    $7.00
  • Item Details

    11 fret slots (ref: SVNF11)

    $7.00
    11 fret slots (ref: SVNF11)

    $7.00
  • Item Details

    12 fret slots (ref: SVNF12)

    $7.00
    12 fret slots (ref: SVNF12)

    $7.00
  • Item Details

    13 fret slots (ref: SVNF13)

    $7.00
    13 fret slots (ref: SVNF13)

    $7.00
  • Item Details

    14 fret slots (ref: SVNF14)

    $7.00
    14 fret slots (ref: SVNF14)

    $7.00
  • Item Details

    15 fret slots (ref: SVNF15)

    $7.00
    15 fret slots (ref: SVNF15)

    $7.00
  • Item Details

    16 fret slots (ref: SVNF16)

    $7.00
    16 fret slots (ref: SVNF16)

    $7.00
  • Item Details

    17 fret slots (ref: SVNF17)

    $7.00
    17 fret slots (ref: SVNF17)

    $7.00
  • Item Details

    18 fret slots (ref: SVNF18)

    $7.00
    18 fret slots (ref: SVNF18)

    $7.00
  • Item Details

    19 fret slots (ref: SVNF19)

    $7.00
    19 fret slots (ref: SVNF19)

    $7.00
  • Item Details

    20 fret slots (ref: SVNF20)

    $7.00
    20 fret slots (ref: SVNF20)

    $7.00
  • Item Details

    21 fret slots (ref: SVNF21)

    $7.00
    21 fret slots (ref: SVNF21)

    $7.00
  • Item Details

    22 fret slots (ref: SVNF22)

    $7.00
    22 fret slots (ref: SVNF22)

    $7.00
  • Item Details

    23 fret slots (ref: SVNF23)

    $7.00
    23 fret slots (ref: SVNF23)

    $7.00
  • Item Details

    24 fret slots (ref: SVNF24)

    $7.00
    24 fret slots (ref: SVNF24)

    $7.00
  • Item Details

    25 fret slots (ref: SVNF25)

    $7.00
    25 fret slots (ref: SVNF25)

    $7.00
  • Item Details

    26 fret slots (ref: SVNF26)

    $7.00
    26 fret slots (ref: SVNF26)

    $7.00
  • Item Details

    27 fret slots (ref: SVNF27)

    $7.00
    27 fret slots (ref: SVNF27)

    $7.00
  • Item Details

    28 fret slots (ref: SVNF28)

    $7.00
    28 fret slots (ref: SVNF28)

    $7.00
  • Item Details

    29 fret slots (ref: SVNF29)

    $7.00
    29 fret slots (ref: SVNF29)

    $7.00
  • Item Details

    30 fret slots (ref: SVNF30)

    $7.00
    30 fret slots (ref: SVNF30)

    $7.00
  • Item Details

    31 fret slots (ref: SVNF31)

    $7.00
    31 fret slots (ref: SVNF31)

    $7.00
  • Item Details

    32 fret slots (ref: SVNF32)

    $7.00
    32 fret slots (ref: SVNF32)

    $7.00
  • Item Details

    33 fret slots (ref: SVNF33)

    $7.00
    33 fret slots (ref: SVNF33)

    $7.00
  • Item Details

    34 fret slots (ref: SVNF34)

    $7.00
    34 fret slots (ref: SVNF34)

    $7.00
Clear selection

Choose a radius for your fingerboard. Classical fingerboards are typically not radiused.

Some fingerboard choices cannot be radiused. In this case, no options will appear.

Radiused boards measure 1/4" at the center. 

You can't add more than 1 quantities

You must add a minimum of 0 quantities

  • Item Details

    No (0) radius (ref: SVR0)

    $0.00
    No (0) radius (ref: SVR0)

    $0.00
Clear selection

If you chose to have your fingerboard radiused or don't plan to radius it, choose the shallow slot. We cannot cut deep slots on Richlite boards. 

If you plan on radiusing your fretboard later, choose the deep slot. 

You can't add more than 1 quantities

You must add a minimum of 0 quantities

  • Item Details

    .095" fret slot depth (ref: SVFSS)

    $0.00
    .095" fret slot depth (ref: SVFSS)

    $0.00
  • Item Details

    .145" fret slot depth (ref: SVFSD)

    $0.00
    .145" fret slot depth (ref: SVFSD)

    $0.00
Clear selection

We will leave 1/8" behind the nut slot unless you choose the Fender-style option of 1". 

You can't add more than 1 quantities

You must add a minimum of 0 quantities

  • Item Details

    .125" space behind the nut (ref: SVFSNO.125)

    $0.00
    .125" space behind the nut (ref: SVFSNO.125)

    $0.00
  • Item Details

    .250" space behind the nut (ref: SVFSNO.25)

    $0.00
    .250" space behind the nut (ref: SVFSNO.25)

    $0.00
  • Item Details

    .375" space behind the nut (ref: SVFSNO.375)

    $0.00
    .375" space behind the nut (ref: SVFSNO.375)

    $0.00
  • Item Details

    .5" space behind the nut (ref: SVFSNO.5)

    $0.00
    .5" space behind the nut (ref: SVFSNO.5)

    $0.00
  • Item Details

    .75" space behind the nut (ref: SVFSNO.75)

    $0.00
    .75" space behind the nut (ref: SVFSNO.75)

    $0.00
  • Item Details

    1.0" space behind the nut (ref: SVFSNO1)

    $0.00
    1.0" space behind the nut (ref: SVFSNO1)

    $0.00
Clear selection

The Standard nut slot moves the kerf back half the width of the slot. Our slots are .024”, so we move it back .012”. This puts the string’s break away point (the edge of the nut) at “true zero”. The Zero Fret option places the nut slot so that it is centered at the zero point of the scale. This works for those who install a zero fret – a fret at the nut position

You can't add more than 1 quantities

You must add a minimum of 0 quantities

  • Item Details

    Standard nut slot position (ref: SVFSN)

    $0.00
    Standard nut slot position (ref: SVFSN)

    $0.00
  • Item Details

    Zero nut slot position (ref: SVFZN)

    $0.00
    Zero nut slot position (ref: SVFZN)

    $0.00
Clear selection

We cannot thickness sand radiused boards. Enter a thickness. Expect 5% +/- tolerance.  Non-radiused boards measure 5/16". Choose this service if you want us to sand your non-radiused board thinner than 5/16". 

You can't add more than 1 quantities

You must add a minimum of 0 quantities

  • Item Details

    Sand unradiused fingerboard to .250" thick (ref: SVFT250)

    $7.00
    Sand unradiused fingerboard to .250" thick (ref: SVFT250)

    $7.00
  • Item Details

    Sand unradiused fingerboard to .187" thick (ref: SVFT187)

    $7.00
    Sand unradiused fingerboard to .187" thick (ref: SVFT187)

    $7.00
Clear selection

Overview

Total :

Share your customization with your firends

Product Description

Use our Fret Scale and Fingerboard Length Calculator to see if the fingerboard you're ordering is long enough.

Details

Wood Species
Maple
Color/Scheme
Birdseye
Shipping Restrictions - Location
No Restrictions
Grade
Subtle Figure
Size
Steel String/Electric
Length
20" or 50.8cm
Width
2 1/2" or 6.3cm
Thickness
5/16" or 7.9mm
Configuration
Fingerboard Blank
Orientation
Flatsawn

Reviews

No customer reviews for the moment.

Write your review

Birdseye Maple fingerboard 5/16" thick, subtle figure, steel string or electric, flatsawn

Far more stable than flamed Maple, these are the only way to go if you want to dress up your electric guitar.

Unfortunately, due to the manufacturing process we use, we are unable to radius Birdseye Maple fingerboards. We use a shaper/molder type tool to radius our boards and the grain of Birdseye Maple tears out when attempting to radius it. Our radius blocks work well for this task.

Would you like us to slot and/or thickness sand your fingerboard? Choose fingerboard customizations below.

Write your review

Related Products