SWF

Inlay cutting saw (jeweler's saw), 2 3/4 inch throat

$17.65

Inlay (jeweler's) saws are used for cutting mother-of-pearl, abalone, plastics, veneers, brass, aluminum, and so on. These adjustable framed saws allow re-use of broken blades, which can be fairly common when doing extremely intricate scrollwork, and will accommodate blades up to 6" long.

BLADES SOLD SEPARATELY

Purchase this quantity to...


In Stock

Product Description

NOTE: When using an inlay saw, 3 teeth of the blade should always be in contact with your material. The finer blade will cut a finer kerf, but will also cut more slowly than a coarser blade. The finer blade will also break faster. You need to make an assessment of the design you’re cutting, the thickness of the material, and the thickness of the kerf you desire when choosing a jeweler’s saw blade.

When cutting with this saw a trick to avoid blade breakage is to keep the saw moving up and down when moving forward. The great thing about this saw is even if you break a blade, the saw is adjustable meaning you can insert broken pieces of the blade and get far more life from your blades.

Details

Shipping Restrictions - Location
No Restrictions
Tool Type or Function
Saw

Reviews

No customer reviews for the moment.

Write your review

Inlay cutting saw (jeweler's saw), 2 3/4 inch throat

Inlay (jeweler's) saws are used for cutting mother-of-pearl, abalone, plastics, veneers, brass, aluminum, and so on. These adjustable framed saws allow re-use of broken blades, which can be fairly common when doing extremely intricate scrollwork, and will accommodate blades up to 6" long.

BLADES SOLD SEPARATELY

Write your review

Recommended Products