Pickup ring, flamed Maple, set of 2 tall, flat bottom
These beautiful pickup rings are machined right here at LMI, so the quality is excellent. Solid wood humbucker pickup rings are a quick and easy way to upgrade the appearance of your guitar.
If you need 2 rings, choose a part number containing a set of 2 rings rather than ordering individual rings. This will ensure you get 2 well-matched rings.
Screws sold separately Screws are available in gold, stainless steel, and black. 4 screws are needed for each pickup ring.
Each ring measures 3 9/16"x 1 25/32" and has a flat bottom. The short rings are 3/16" thick and the tall rings are 3/8" thick (room to arch for Les Paul type guitars).
Gibson-style bridge configurations typically call for one short (neck position) and one tall (bridge position) pickup ring, while Fender-style bridge configurations typically call for two short rings.
These pickup rings are pre-sanded with 150 grit paper. To make the figure pop, you can sand with a 600 or 800 grit paper and apply a coat of oil.
- Wood Species
- Maple - Bigleaf
- Shipping Restrictions - Location
- No Restrictions
- 3/8" or 9.5mm