- On Sale
Headstock slotting and drilling jig for steel string, complete
LMI developed the Headstock Slotting & Drilling Jig to easily rout consistent slots in the heads of classical guitars or vintage/parlor style steel string guitars. It is CNC machined of aluminum for accuracy. This tool also has a drill guide to accurately drill the 70mm-spaced tuning machine holes. The peghead of your guitar is securely held in place for the routing of the slots by three large thumbscrew clamping bolts.
The complete Headstock Slotting & Drilling Jig comes with:
- The base
- Steel string bar
- A hex wrench
- 6mm aircraft drill for steel string tuner holes
Either a bit with a flush bearing or a router base with a guide bushing can be used to machine the slot. We offer a ¼" down cut, spiral bit – CA250DL – for use with a guide bushing set up. Its down shear design greatly reduces tear out for a crisp, clean cut: ¼ shaft, 1" cutting length, 2½" overall length.
The tool is designed for routing and drilling on one side of the head at a time and this work is accomplished quickly and accurately. The tool can be paid for with the time saved on just a couple of jobs. Use our HSSJ1332 13/32" twist drill bit to drill the roller holes if you purchase the classical version or the HSSJDB 6mm aircraft (extra long) drill bit if you purchase the steel string version.
Use our CA250UDL combination carbide upcut/downcut bit for a clean finish on either face of your headstock. It's a little more expensive but well worth it. We use this bit regularly in our shop. It has a 1/4" 2-flute upcut for 3/16" of the bit, then transitions to a 2-flute downcut for the remaining 9/16" of the cutting length. Overall length 2 1/2", Total LOC: .75".
- Shipping Restrictions - Location
- No Restrictions
- Tool Type or Function
No customer reviews for the moment.