This template is designed to be used with the LMI Headstock Drilling and Slotting Jig. It is configured for the '37 Hauser classical guitar (PL64). See the attached .pdf for specs on the slots that can be produced.
Important Note: This template is derived from the 1937 Hauser plan based on an actual instrument. This instrument's peghead was asymmetrical. For this reason, this template has two sides - a right and a left. If you want your instrument to be symmetrical, use only one side of the template. If you wish to replicate the original instrument, use both sides.
No customer reviews for the moment.
This template is designed to be used with the LMI Headstock Drilling and Slotting Jig. It is configured for the '37 Hauser classical guitar (PL64). See the attached .pdf for specs on the slots that can be produced.
Important Note: This template is derived from the 1937 Hauser plan based on an actual instrument. This instrument's peghead was asymmetrical. For this reason, this template has two sides - a right and a left. If you want your instrument to be symmetrical, use only one side of the template. If you wish to replicate the original instrument, use both sides.
