Drill block for Headstock Drilling/Slotting Jig, 1/4" posts
This drill block is meant to be used with the LMI Headstock Drilling and Slotting Jig. It is designed to be used to drill holes for tuners with 1/4" shafts and where hole bushings are not provided/used. One drill block is included with the jig. A 1/4" (.250") drill bit should be used with this drill block. See the photo below for a further explanation of which drill block/bit to use when drilling for your slot-head tuners.
Note: Most manufacturers of tuners with 1/4" shafts recommend a 1/4" drill bit, but if the shafts actually measure 1/4", this might be a bit tight and require a bit of reaming out.
This item is not meant to be used as a stand-alone drill guide.
- Shipping Restrictions - Location
- No Restrictions
- Tool Type or Function
- Slot/Drill Peghead