SHSDSJ-ST2

Template for Headstock Drilling/Slotting Jig, O'Brien classical

$13.95

This template is designed to be used with the LMI Headstock Drilling and Slotting Jig. It is configured for the O'Brien classical guitar (PL79). See the attached .pdf for specs on the slots that can be produced. 

Important Note: This template is derived from the O'Brien plan based on an actual instrument. This instrument's peghead was asymmetrical. For this reason, this template has two sides - a right and a left. If you want your instrument to be symmetrical, use only one side of the template. If you wish to replicate the original instrument, use both sides.

Purchase this quantity to...


In Stock

Attachments

Product Description

Details

Shipping Restrictions - Location
No Restrictions
Tool Type or Function
Slot/Drill Peghead

Reviews

No customer reviews for the moment.

Write your review

Template for Headstock Drilling/Slotting Jig, O'Brien classical

This template is designed to be used with the LMI Headstock Drilling and Slotting Jig. It is configured for the O'Brien classical guitar (PL79). See the attached .pdf for specs on the slots that can be produced. 

Important Note: This template is derived from the O'Brien plan based on an actual instrument. This instrument's peghead was asymmetrical. For this reason, this template has two sides - a right and a left. If you want your instrument to be symmetrical, use only one side of the template. If you wish to replicate the original instrument, use both sides.

Write your review

Recommended Products