Gotoh, slot-head, vintage-style, nickel, nickel buttons
Depending on the wall thickness of your slot, the screws provided with these tuners might be a tiny bit long. Measure before you insert the screws. If they are too long, start the screw then back it out. Nip off the tip and re-insert the screw to full depth.
All of our slot-head tuners come with 12 stainless steel knurled barrel bushings. These are not strictly necessary, but we find that many of our customers prefer to use them when installing our slot-head tuners. The bushings can be easily installed by drilling a 5/16" hole in the peghead and inserting the bushing with our GBT bushing insertion tool. The inside of the bushings will accommodate a 6mm slot-head tuner shaft.
Everything shown in the photo is included with your purchase. Requires a 5/16" post hole if included bushings are used 15/64" if bushings are not used.
- Shipping Restrictions - Location
- No Restrictions
- Steel String 3L/3R Slot-head
- Gear Ratio