GGSR

Gotoh, 3-on-a-plate, slot-head, gold plate, ivoroid buttons

$94.49

Depending on the wall thickness of your slot, the screws provided with these tuners might be a tiny bit long. Measure before you insert the screws. If they are too long, start the screw then back it out. Nip off the tip and re-insert the screw to full depth. 

SAVE $$ - Quantity discounts

Purchase this quantity to... save this much:
3 $31.17
Purchase this quantity to...


In Stock

Product Description

All of our slot-head tuners come with 12 stainless steel knurled barrel bushings. These are not strictly necessary, but we find that many of our customers prefer to use them when installing our slot-head tuners. The bushings can be easily installed by drilling a 5/16" hole in the peghead and inserting the bushing with our GBT bushing insertion tool. The inside of the bushings will accommodate a 6mm slot-head tuner shaft.

Everything shown in the photo is included with your purchase.  Requires a 5/16" post hole if included bushings are used 15/64" if bushings are not used.

Details

Color/Scheme
Gold
Shipping Restrictions - Location
No Restrictions
Configuration
Steel String 3 on-a-plate Slot-head
Button
Ivoroid
Post Spacing
70mm
Brand
Gotoh
Gear Ratio
14:1

Reviews

No customer reviews for the moment.

Write your review

Gotoh, 3-on-a-plate, slot-head, gold plate, ivoroid buttons

Depending on the wall thickness of your slot, the screws provided with these tuners might be a tiny bit long. Measure before you insert the screws. If they are too long, start the screw then back it out. Nip off the tip and re-insert the screw to full depth. 

Write your review