FSSC30

Bob Smith Slow-Cure epoxy, 4.5 ounces

$11.99

SLOW-CURE™ 30 min. epoxy works best for forming reinforcing fillets on joints. It has the highest strength of the Bob Smith epoxies. It is waterproof and more heat resistant than the faster curing products. SLOW-CURE™ can be used for bonding if you’re willing to wait overnight. Fillers such as microballoons can be mixed with SLOW-CURE™ to form a putty-like consistency. Such fillers will usually decrease the working time by about 25%. Bonded objects can be handled after 8 hours and the cured epoxy reaches full strength within 24 hours.

Purchase this quantity to...


In Stock

Attachments

SDS FSSC30

Safety Data Sheet Slow-Cure

Product Description

SLOW-CURE™ 30 min. Epoxy is an equal two-part hobby adhesive that forms high strength bonds through a chemical reaction between the resin and hardener. The cured epoxy is resistant to most chemicals.

SLOW-CURE™ has the highest strength of our epoxies and should be applied in temperatures above 70°F. SLOW-CURE™ maintains it’s strength in both the lowest and highest temperature ranges of our line of epoxies.

SLOW-CURE™ bonds best to clean, textured surfaces. Smooth, non-porous surfaces should be roughened with coarse sandpaper to improve adhesion. Acetone and Isopropyl rubbing alcohol work as the best solvents for cleaning uncured epoxy from surfaces. SLOW-CURE™ works best for forming reinforcing fillets on joints and can be mixed with micro balloons or other fillers to form a putty-like consistency. SLOW-CURE™ is waterproof and forms superior bonds if you’re willing to wait overnight. It has better penetration of porous surfaces for better bonding. Full cure in 6-8 hours.

Works Best On:

  • Glass & Metal
  • White Foam
  • Water-Resistant
  • Reinforcing

Works Well On:

  • Balsa Wood
  • Soft Wood
  • Hard Wood
  • Fiberglass
  • Hard Plastics
  • Laminating

Details

Shipping Restrictions - Location
No Restrictions
Brand
Bob Smith
Glue Type
Epoxy

Reviews

No customer reviews for the moment.

Write your review

Bob Smith Slow-Cure epoxy, 4.5 ounces

SLOW-CURE™ 30 min. epoxy works best for forming reinforcing fillets on joints. It has the highest strength of the Bob Smith epoxies. It is waterproof and more heat resistant than the faster curing products. SLOW-CURE™ can be used for bonding if you’re willing to wait overnight. Fillers such as microballoons can be mixed with SLOW-CURE™ to form a putty-like consistency. Such fillers will usually decrease the working time by about 25%. Bonded objects can be handled after 8 hours and the cured epoxy reaches full strength within 24 hours.

Write your review

Recommended Products