FSMC15

Bob Smith Mid-Cure epoxy, 4.5 ounces

$11.99

MID-CURE™ 15 min. epoxy is used in larger areas where more working time is needed. It is more water-resistant than QUIK-CUREand can be used as a substitute in most applications. MID-CURE™ is Bob Smith's most flexible epoxy and is ideal for gluing to fiberglass surfaces. Allow 45 minutes before handling parts and 2 hours for full strength.

Purchase this quantity to...


In Stock

Attachments

SDS FSMC15

Safety Data Sheet Mid-Cure

Product Description

MID-CURE™ 15 min. epoxy is an equal two-part hobby adhesive that forms high strength bonds through a chemical reaction between the resin and hardener. The cured epoxy is resistant to most chemicals.

MID-CURE™ should be applied in temperatures above 65˚F. It can be used in most applications when you need more working time than QUIK-CURE™ provides. MID-CURE™ can be worked for about 10 minutes, with adhesion beginning after about 15 minutes.

MID-CURE™ bonds best to clean, textured surfaces. Smooth, non-porous surfaces should be roughened with coarse sandpaper to improve adhesion. Acetone and Isopropyl rubbing alcohol work as the best solvents for cleaning uncured epoxy from surfaces. MID-CURE™ is Bob Smith's most flexible epoxy. This gives it superior bonding qualities in applications such as hardwood to fiberglass. MID-CURE’S™ lack of brittleness allows it to form lasting bonds in areas subject to high vibration or stress. MID-CURE™ is a water-resistant substitute for QUIK-CURE™. Full cure in 2-3 hours.

Works Best On:

  • Hard Wood
  • Fiberglass

Works Well On:

  • Balsa Wood
  • Soft Wood
  • Glass & Metal
  • Hard Plastics
  • Rubber
  • White Foam
  • Laminating
  • Water-Resistant
  • Reinforcing

Details

Shipping Restrictions - Location
No Restrictions
Brand
Bob Smith
Glue Type
Epoxy

Reviews

No customer reviews for the moment.

Write your review

Bob Smith Mid-Cure epoxy, 4.5 ounces

MID-CURE™ 15 min. epoxy is used in larger areas where more working time is needed. It is more water-resistant than QUIK-CUREand can be used as a substitute in most applications. MID-CURE™ is Bob Smith's most flexible epoxy and is ideal for gluing to fiberglass surfaces. Allow 45 minutes before handling parts and 2 hours for full strength.

Write your review

Recommended Products