FGFNFT

GluBoost Fill n' Finish Thin Formula, 2 oz (includes 2 whip tips and 2 extender nozzles)

$23.98

  • Great for repairing all types of cracks
  • Use as a top coat over Fill n' Finish Pro Formula for perfect base coat in build ups
  • Suitable for small brush work and wick-ins for lifting inlays prior to clamping
  • Use as a stain sealer
  • Other uses include as a flexible top coat, for finish work on inlays, and on any areas where a brittle, thin glue would fail
  • Safe for use on all finishes - nitro, lacquer, poly, urethane, and even water-based finishes
  • You can shoot lacquer right over Fill n' Finish Thin with completely invisible results
  • No Creeping and zero to minimal witness lines every time
Purchase this quantity to...


Product Description

Fill n' Finish Thin is for use on less porous woods. For more porous woods, like Mahogany or Rosewood, use Fill n' Finish Pro.

Fill n’ Finish Thin:

Use with Non-Blushing GluDry for super fast and clear finish and repair work. For flexible topcoats, on the spot drop fills, and effective repair of dings and dents:

  1.  Prepare area as you normally would
  2.  Apply Fill n' Finish Thin
  3.  Spray with Non-Blushing GluDry
  4.  Use Fill n' Finish Pro Formula to fill deeper ding if needed.
  5.  Spray with Non-Blushing GluDry
  6.  Wait (See Note drying time information.)
  7.  Light polish using micro mesh and or a polishing compound if desired.
  8.  Fill n' Finish Thin can be used for your final topcoat if desired.

Details

Shipping Restrictions - Location
No Restrictions
Brand
GluBoost

Reviews

No customer reviews for the moment.

Write your review

GluBoost Fill n' Finish Thin Formula, 2 oz (includes 2 whip tips and 2 extender nozzles)

  • Great for repairing all types of cracks
  • Use as a top coat over Fill n' Finish Pro Formula for perfect base coat in build ups
  • Suitable for small brush work and wick-ins for lifting inlays prior to clamping
  • Use as a stain sealer
  • Other uses include as a flexible top coat, for finish work on inlays, and on any areas where a brittle, thin glue would fail
  • Safe for use on all finishes - nitro, lacquer, poly, urethane, and even water-based finishes
  • You can shoot lacquer right over Fill n' Finish Thin with completely invisible results
  • No Creeping and zero to minimal witness lines every time

Write your review

Recommended Products