FW57110

Fretwire, 18% nickel/silver, 4 feet

$9.58

Buy more & save! Save 20% on 6 or more.

Massive! Our biggest wire. Used on basses and rock guitars for those looking for a scalloped fingerboard feel. Similar to Dunlop's #6000. Larger than LMI's FW110.

Fretwire is sold in either 4 or 100-foot lengths. 4 feet is normally enough for one standard instrument if you're not wasteful, but please check your plans before ordering. For easier installation, fretwire is coiled with the tang toward the inside of the curve. 4-foot sections might be cut into halves for shipping purposes. All of the fretwire we carry will fit into a .023" slot, with the exception of the FW75 nickel/silver wire.

Fretwire Comparison Chart Link

SAVE $$ - Quantity discounts

Purchase this quantity to... save this much:
6 $11.52
Purchase this quantity to...


In Stock

Product Description

Installation Tip: The juncture of the tang and the crown on fretwire is not a crisp 90º angle, instead it is slightly radiused (+/- 15º) We recommend slightly beveling the edges of the fingerboard slots with a needle file so that the fretwire seats properly. This beveling also makes it possible to pull out the fretwire, if necessary, without fear of tearing up wood. A drop or so of water in the fret slot helps lubricate for easier tang entry.

Fretwire Sizes and Slot Widths article

Details

Shipping Restrictions - Location
No Restrictions
Size
Jumbo
Configuration
Coiled
Content
Nickel/Silver
Fret Height
0.131" or 3.33mm
Crown Height
0.057" or 1.45mm
Crown Width
0.110" or 2.79mm
Tang Width
0.020" or 0.51mm
Stud Width
0.036" or 0.91mm
Sold by Length
Approx. 4 feet

Reviews

No customer reviews for the moment.

Write your review

Fretwire, 18% nickel/silver, 4 feet

Buy more & save! Save 20% on 6 or more.

Massive! Our biggest wire. Used on basses and rock guitars for those looking for a scalloped fingerboard feel. Similar to Dunlop's #6000. Larger than LMI's FW110.

Fretwire is sold in either 4 or 100-foot lengths. 4 feet is normally enough for one standard instrument if you're not wasteful, but please check your plans before ordering. For easier installation, fretwire is coiled with the tang toward the inside of the curve. 4-foot sections might be cut into halves for shipping purposes. All of the fretwire we carry will fit into a .023" slot, with the exception of the FW75 nickel/silver wire.

Fretwire Comparison Chart Link

Write your review

Recommended Products