Target Coatings EM6000 Satin, water-based production lacquer, 32 ounces
EM6000 Production Lacquer is an ultra-clear, water-based acrylic lacquer that utilizes advanced polymer resins and HAPS-Free solvent technology to provide a 100% burn-in functionality that offers the performance of a traditional nitrocellulose-type lacquer in an Ultra-Low VOC water-based format. EM6000 is specifically designed to replace flammable nitrocellulose-based finishes.
All of our Target Coatings products are water-based.
The Data Sheet and Safety Data Sheet can be found in the 'Attachments" below the 'Add to Cart" button on this page.
100% Burn-In Technology in a Water-Based Formula
EM6000 Production Lacquer (EPLv8.0) is an ultra-clear, water-based acrylic lacquer that utilizes advanced polymer resins and HAPS-Free solvent technologies to provide a unique, self-leveling wood finish designed for commercial and industrial applications. EM6000 water-based acrylic lacquer is formulated for use in furniture, cabinet, interior architectural, and custom woodworking applications, and provides a fast-drying lacquer system with exceptional clarity, outstanding adhesion qualities and a nitrocellulose-type appearance and performance all in an Ultra-Low VOC (ULVOC), 100% water-based system.
With a solvent look and feel, EM6000 Production Lacquer features a unique adhesion characteristic that allows it to bond well to wood
When used as a self-sealing system EM6000 Production Lacquer offers fast drying and sanding features identical to those of traditional nitrocellulose lacquers and CAB acrylic systems. EPL generates excellent clarity and color definition when used with other sealers or as a stand-alone production finish. EM6000 water-based acrylic lacquer is non-flammable, low in odor, and cleans up with water.
EM6000 Production Lacquer can be fortified with our CL100 Cross-Linker to create a post-catalyzed type lacquer. The addition of 3 to 5% liquid volume of CL100 will improve the physical durability of EM6000 by tightening the molecular structure of the cured resin. CL100 improves the resistance of the cured film against high pH cleaners, alcohols, and slow evaporating household chemicals. See the TDS for CL100 Cross-Linker for more information.
EM6000 can be tinted with ANY water-soluble dye including TransTint dyes.
Directions for Use
All surfaces to be finished must be clean and free of oil, dust, and contamination that may cause fisheyes or poor adhesion. Clean surface with denatured alcohol or fresh water. Allow the surface to thoroughly dry before proceeding. Fine sand surface to be finished with the appropriate grade sandpaper based on the type of final finish required. If the surface to be finished has a grain-filling type glaze, sealer, or paste; ensure that the systems are compatible with one another by preparing a test panel before proceeding. Certain solvent-based fillers and glazes may prevent proper adhesion of the topcoat if not thoroughly cured. Ensure that grain fillers have been sanded with a minimum of 400-grit sandpaper and all contamination is removed. Oil-Based glazes should be air-dried and tested to ensure proper early adhesion of the water-based topcoat. Spray-apply each coat of EM6000 Production Lacquer with HVLP, conventional, or airless/air-assist spray equipment. Consult with your spray gun manufacturer for proper gun set-ups based on coating viscosity and intended use. Spray gun operators must wear a NIOSH-approved respirator during the spray application of this material. Consult the Material Safety Data Sheet of this material for safety and health procedures.
- Shipping Restrictions - Location
- No Restrictions
- Target Coatings
- Finish Type
No customer reviews for the moment.