Rosette cutter 1/4" x 1/4" - 1 relief classical blade, indiv.
Replacement or additional pieces for the Drill Press Rosette Cutter.
The body of the tool is a ½" thick 6 5/8" wide aluminum flywheel-type disc with a ½" center-mounted steel dowel pin for mounting in the drill press chuck. There is a ¼" steel dowel pin on the downside that centers through the soundhole center in the top into a ¼" hole in your drill press base (this hole is best reinforced with the ¼" drill bushing that we provide). Even though this tool is machined and balanced for smooth operation, this lower guide pin really stabilizes the whole operation. The tool is designed to use ¼" x ¼" high-speed steel cutters to cut the various channels. Two opposing ¼" slots in the disc with adjustable Allen screws inside and outside will hold any combination of cutters and spacers. Rosette channels from 3 3/8" ID to 6" OD can be cut with this tool.
The Rosette Cutter includes:
- A cutter set (depending on which version you order)
- 9 shims (3-1/16", 3-1/8" and 3-1/4" wide)
- The necessary Allen wrenches for securing the cutters in place
- A ¼" drill bushing.
- Blank cutters are available for custom shaping
- Shipping Restrictions - Location
- No Restrictions
- Tool Type or Function