GlanzMax solid polishing compound - pre-polish cutting compound, 3 pound bar
Buffing out a finish to a mirror-like gloss with a buffing wheel is a relatively simple task when using dry polishing compounds.
Depending on how finely you've sanded, this is probably the first in the series of buffing compounds you should use. It is a brown Tripoli compound meant to buff out sanding scratches from 400 grit up.
Start with a fresh cotton buffing wheel and "charge" the wheel with the compound by holding it against the wheel for 3 to 5 seconds and start to buff. The wheel may need periodic recharging throughout the buffing process. You MUST have a different wheel for each compound to get the best results.
Bar weights vary slightly from the advertised weight.
|Photograph||SKU||Menzerna SKU||When to use|
|N/A||After sanding with 400 grit abrasive|
|FMEZP||P204||After sanding with >600 grit abrasive|
|FMEZW||GW16||After sanding with 800 grit abrasive|
|FMEZW58||W58||After previous polishing|
|FMEZP175||P175||After previous polishing|
- Shipping Restrictions - Location
- No Restrictions