Menzerna solid polishing compound - P175, ultra-fine compound, 3 pound bar
Buffing out a finish to a mirror-like gloss with a buffing wheel is a relatively simple task when using Mernzena's dry polishing compounds. Menzerna sticks have been designed to work with tougher high urethane content finishes as well as nitrocellulose lacquer.
Start with a fresh cotton buffing wheel and "charge" the wheel with the compound by holding it against the wheel for 3 to 5 seconds and start to buff. The wheel may need periodic recharging throughout the buffing process. You MUST have a different wheel for each compound to get the best results.
Bar weights vary slightly from the advertised weight.
|Photograph||SKU||GlanzMax SKU||Menzerna SKU||When to use|
|80||N/A||After sanding with 400 grit abrasive|
|FMEZP||N/A||P204||After sanding with >600 grit abrasive|
|FMEZW||N/A||GW16||After sanding with 800 grit abrasive|
|FMEZW58||N/A||W58||After previous polishing|
|FMEZP175||N/A||P175||After previous polishing|
- Shipping Restrictions - Location
- No Restrictions