Binding cutter and wrench, long shank
Our Binding Cutter can be purchased in two configurations: the SPCUT short shank cutter, or the SPCUTL long shank cutter. . The short shank is fine for most applications but if you need a little more reach, get the long shank (see additional notes below).
The cutter is a specially designed 1" router cutter with carbide cutting tips. The bearing/wheels are attached to the cutter with a small hex cap screw.
- Cutter has a 5°
- Cutter shank diameter
- Cutter shank length is 1.388" on the short version.
- Cutter shank length is 1.450" on the long version.
- Cutting edge
If you are using this cutter with our new Professional Binding Machine, BM2, you can use either cutter (long or short version).
If you are using this cutter with our older binding machine (formerly called the Universal Binding Machine):
If your binding machine has a white Delrin shoe that rides on the ledge of the guitar, use the short shank cutter.
If your binding machine has a black HDPE shoe that rides on the guitar ledge, use the longer shank cutter.
- Shipping Restrictions - Location
- No Restrictions
- Tool Type or Function
- Binding Cutter