Products

Testimonials

After three orders of fingerboards, and finding them to be exactly what I ordered, I felt I needed to tell everybody these people and the products they sell are excellent! They made a special effort to send my request for a specific color, it was perfect! The wood in these boards is awesome. Thank you very much for attention to my wishes.

Sincerely Jim

Neck Joint Router Bits

ROUTERneckJointBitStraightSPRB38600 ROUTERneckJointBitDovetailSP7DT600 ROUTERneckJointBitStraightSPRB12600
SPRB38 SP7DT/SP7DTL SPRB12

STRAIGHT & DOVETAIL CUT BITS

Our 3/8 inch bit (SPRB38) works well for hogging out the material on a dovetail–then you can follow with the 7 degree dovetail bit (SP7DT/SP7DTL). Use the 1/2 inch straight bit (SPRB12) for use with the straight mortise and tenon template. You will need a 5/8 inch OD router guide bushing when using these bits with these templates (Guide bushings can typically be purchased wherever routers are sold). These bits are great for use with our Mortise and Tenon templates.


SKU Product Name In Stock Each  
SPRB38 3/8" carbide router bit, straight cut, 1 1/4" LOC, 1/2" shank, 3" OAL Yes $16.85
SP7DT 1/2" carbide router bit, 7 degree dovetail, 3/4" LOC, 1/2" shank, 2-1/2" OAL Yes $22.84
SP7DTL 1/2" carbide router bit, 7 degree dovetail, 3/4" LOC, 1/2" shank, 3-1/8" OAL Yes $29.75
SPRB12 1/2" carbide router bit, straight cut, 1 1/4" LOC, 1/2" shank, 3" OAL Yes $18.85
SPGB58 5/8" template guide bushing with centering pin Yes $14.95