Products

Testimonials

"Just received my latest classical guitar kit. I had a couple of requests for wood selection, and you did a great job in selecting on both counts,
In addition, all the wood was great quality - this was an expensive kit, but your product made it a very good value to me.

Thanks for the great work!"

Mike 

Peghole Reamers

 


HIGHEST QUALITY REAMER
10mm tapering to 5.5mm. 135mm long. Taper: 1/30

Our German peghole reamer is essential for builders who employ friction pegs, and virtually a necessity for those who use Schallers™, Gotohs™, Grovers™, and most tuning machines where either the bushings or the barrels are 10mm (3/8") in diameter. This reamer has three blades on one side working against the opposite smooth side. This configuration gives the roundest hole. (Fully-bladed and half-cone types of reamers tend to make rough cuts and eccentric holes.) It's the only reamer we've seen that's titanium-nitride coated; the life of the blade is extended from 3-5 times! Because the friction coefficient is less, cutting is cleaner and easier.

 

GOOD QUALITY REAMER
9.5mm tapering to 5mm. 135mm long. Taper: 1/30

The blades of this American-made reamer are nicely machined in the same configuration as the SPRM, above. This reamer is a bit to small to work for classical guitar machines, but it works well for friction pegs.


SKU Product Name In Stock Each  
SPRM Highest quality reamer Yes $149.23
SPRM2 Good quality reamer Yes $45.93