Products

Testimonials

“Place an order, it is processed the next business day. Most likely same day if you don't place it at midnight local time. You can track the parcel online. And 6 days later the delivery guy is knocking on my front door. Unbelievable, you get high quality tools and equipment, California to Australia in 6 days. Amazing, LMI is the only place to buy..."

Rod Brisbane, Australia

Small Diameter Spiral Bits

 

 

ENDMILLSGroup150b

Our small diameter spiral bits are high quality, two flute, solid carbide cutters – made for long useful operation. The 1/8" shank cutters are usually used in a small Dremel type rotary tools and 1/4" shank cutters are typically used in a laminate trimmer or router.

  • The chart below shows the size, cut, and a small photo of each bit.
  • The prices are shown at the bottom of the page, along with the HSSC/HSSCL adaptors
    for 1/4" collets.
SKU shank diameter cutter diameter full length length of cut up/downcut photo
CA020D 1/8" .020" 1 1/2" 1/16" D click
CA030D 1/8" .030" 1 1/2" 1/16" D click
CA040D 1/8" .040" 1 1/2" 1/16" D click 
CA047D 1/8" 3/64" or .047" 1 1/2" 1/8" D  click
CA050D 1/8" .050" 1 1/2" 1/16" D click
CA055D 1/8" .055" 1 1/2" 1/8" D click
When creating a 3-ring rosette, the CA055D bit works great for cutting
the inner and outer rosette slots to accommodate our PFLMSH10 B/W/B purfling.
CA062U 1/8" 1/16" or .062" 1 1/2" 3/16" U click
CA062D 1/8" 1/16" or .062" 1 1/2" 1/4" D click
CA094DL 1/4" 3/32" or .094" 1 1/2" 1/2" D click
CA125D 1/8" 1/8" or .125" 1 1/2" 1/2" D click
CA125DL 1/4" 1/8" or .125" 2" 1/2" D click
CA156DL 1/4" 5/32" or .156" 2" 9/16" D click
CA187DNS 3/16" 3/16" or .187" 2" 11/16" D click
CA250DL 1/4" 1/4" or .250" 2 1/2" 3/4" D click
The CA250DL bit is well suited for use with our SPHSSJ Headstock Slotting Jig.
CA250UL 1/4" 1/4" or .250" 2 1/2" 3/4" U click
CA250UDL 1/4" 1/4" or .250" 2 1/2" 3/4" U/D click
CA250UDXL 1/4" 1/4" or .250" 3" 1" U/D  
The CA250UDL and CA250UDXL combination carbide upcut/downcut bits leave a clean finish on either face of your stock. They are more expensive but well worth the price. We use these bits regularly in our shop. They have a 1/4" 2 flute upcut for a small portion of the bit then they transition to a 2 flute downcut for the remainder of the cutting length. 
                             Upcut = right-hand spiral, right-hand cut, Downcut = left-hand spiral, right-hand cut.

SKU Product Name In Stock Each  
CA020D Router bit, carbide, .020" cut, 1/8" shank
Yes $32.95
CA030D Router bit, carbide, .030" cut, 1/8" shank
Yes $32.95
CA040D Router bit, carbide, .040" cut, 1/8" shank
Yes $32.95
CA047D Router bit, carbide, .047" cut, 1/8" shank
Yes $17.95
CA050D Router bit, carbide, .050" cut, 1/8" shank
Yes $32.95
CA055D Router bit, carbide, .055" cut, 1/8" shank
Yes $27.95
CA062U Router bit, ball end, 1/16" cut, 1/8" shank
Yes $20.70
CA062D Router bit, carbide, 1/16" cut, 1/8" shank
Yes $27.95
CA125D Router bit, carbide, 1/8" cut, 1/8" shank
Yes $21.25
CA125DL Router bit, carbide, 1/8" cut, 1/4" shank
Yes $25.50
CA156DL Router bit, carbide, 5/32" cut, 1/4" shank
Yes $25.50
CA187DNS Router bit, ball end, carbide, 3/16" cut, 3/16" shank
Yes $20.70
CA250DL Router bit, carbide, 1/4" cut, 1/4" shank
Yes $25.50
CA250UL Router bit, ball end, carbide, 1/4" cut, 1/4" shank
Yes $25.50
CA250UDL Router bit, carbide, combo up/down, 1/4" cut, 1/4" shank
Yes $48.95
CA250UDXL Router bit, carbide, combo up/down, 1/4" cut, 1/4" shank
Yes $52.95
HSSC 1/8" split bushing adaptor for 1/4" collet
Yes $13.80
HSSCL 3/16" split bushing adaptor for 1/4" collet
Yes $15.75