Products

Testimonials

After three orders of fingerboards, and finding them to be exactly what I ordered, I felt I needed to tell everybody these people and the products they sell are excellent! They made a special effort to send my request for a specific color, it was perfect! The wood in these boards is awesome. Thank you very much for attention to my wishes.

Sincerely Jim

Bloodwood replacement buttons, 510 styleElectric knob, Boxwood for 6mm shaft

Gotoh, slot-head, vintage-style, nickel, nickel buttons

SKU: GGMKSLOTN

  • TUNERGotohSlotVintageGGMKSLOTN50015:1 gear ratio
  • Requires an 9/32" post hole if included bushings are used 15/64" if bushings are not used.*
  • Sold in sets of 6 (3L/3R)
  • Screws and bushings are included.

 *NOTE: If you use the bushings supplied with these tuners use a 9/32" - 19/64" drill bit. You need to drill a test hole first as drill bits vary in size from their advertised spec. The bushing should fit snugly, but not too tight so as to crack your peghead. If you don't use the bushings and insert the tuners directly into wood, you need 15/64" or B drill bit. Again, you need to test on a piece of scrap material to ascertain that the fit is right.

See schematics



SKU Product Name In Stock Each 3+  
GGMKSLOTN Gotoh, slot-head, vintage-style, nickel, nickel buttons Yes $37.99 $33.82