Products

Testimonials

“You guys are the best. I just received my order and literally every time i describe my specifications on how the fretboards should look you guys deliver 10/10. the two long scale indian rosewood fingerboards looks simply spectacular and the ziricote is glorious. I usually dont take the time to write these but this time I had to. Thanks for years of wonderful service guys. And if you can find the guys who helped pick my recent boards, make sure to personally tell them how happy I am."

Loyal Customer, AM

Gotoh economy friction peg, nickel, blac...Caul set only – 12" radius

Gotoh, slot-head, brass open gear, nickel, nickel buttons

SKU: GNBSLOT

  • TUNERGotohNickelBrassSlotGNBSLOT40015:1 gear ratio
  • Requires an 9/32" post hole if included bushings are used 15/64" if bushings are not used.*
  • Sold in sets of 6 (3L/3R)
  • Screws and bushings are included.

*NOTE: If you use the bushings supplied with these tuners use a 9/32" - 19/64" drill bit. You need to drill a test hole first as drill bits vary in size from their advertised spec. The bushing should fit snugly, but not too tight so as to crack your peghead. If you don't use the bushings and insert the tuners directly into wood, you need 15/64" or B drill bit. Again, you need to test on a piece of scrap material to ascertain that the fit is right.

See schematics



SKU Product Name In Stock Each 3+  
GNBSLOT Gotoh, slot-head, brass open gear, nickel, nickel buttons Yes $74.56 $66.36